Complete drip and spray irrigation kit with 50m hose, nozzles, connectors, fixing stakes, 201 pieces

1 x irrigation hose 1/4 ”(tube on flexible) - length 50m /interior 4mm /outer 6mm

• The main pipe through which the water is distributed to each watering point. It is flexible, easy to handle and can be cut to the desired size.

50 x Adjustable drip nozzle

• The piece with sharp tip and a rotary lid, which allows the adjustment of the flow from slow to the thin circular jet, for precise watering.

15 x fog -type spray nozzle

• Watering head that produces a fine fog, ideal for flowers or sensitive plants. It is easily mounted and ensures wide coverage.

50 x Type T connection with Gimpi

• The piece used to branch the main hose line in two side directions. It is set directly into the hose, without clamps.

3 x Caps closure line

• Pieces that are mounted at the end of the hose to stop the flow of water and seal the line.

15 x reduced T -type connector (1/4 "reduction in the nozzle)

• The t -shaped piece used to branch the 1/4 "hose in two directions, having one of the ends with a different diameter or interior thread to install a no

C supports that fix the hose in position above the ground, keeping the nozzles oriented correctly.

1 x tap connector with 2 outputs

• It is mounted on the garden tap and allows to connect two lines of irrigation simultaneously, each with its own closing tap.

3 x fast hose connector 1/4 "

• The piece that connects the 1/4 ”hose to the system, allowing quick coupling without tools or threading.

1 x 3/4 ”thread adapter for tap

• The piece that is screwed on a standard garden tap (with 3/4 thread) and connects the rest of the system.

1 x Adapter for smooth tap with metal necklace

• The piece that is fixed on the tap without thread and allows the hose to be connected by the fast jack. It is attached with an adjustable metal necklace.

1 x Teflon band

• Used to seal the threaded joint (eg tap or connectors), preventing water leaks.