1 x irrigation hose 1/4 ”(tube on flexible) - length 41m /interior 4mm /outer 6mm
The main pipe through which the water is distributed to each watering point. It is flexible, easy to handle and can be cut to the desired size.
1 x electronic timer for irrigation
Programmable device that automatically controls the start and stop of the irrigation system. It works on the batteries and allows the exact duration, frequency and time to set the time of watering. Are mounted between the tap and the rest of the installation
1 x Quick Mother Adapter for hose (for timer output)
The piece that allows the quick connection to the hose when the timer output. Provides click -free clamping.
1 x Quick Mother Adapter for hose (for timer output)
The piece that adapts the timer timer thread
20 x Adjustable drip nozzle
The piece with sharp tip and a rotary lid, which allows the adjustment of the flow from slow to the thin circular jet, for precise watering.
18 x Type T connection with Gimpi
The piece used to branch the main hose line in two side directions. It is set directly into the hose, without clamps.
20 x type C fixing tap
C supports that fix the hose in position above the ground, keeping the nozzles oriented correctly.
1 x Double thread distributor adapter and 1/4 "outputs
The piece that is mounted on the output of the system (eg timer or tap) and allows the simultaneous connection of two 1/4 hoses.
1 x 3/4 ”thread adapter for tap
The piece that is screwed on a standard garden tap (with 3/4 thread) and connects the rest of the system.
1 x Adapter for smooth tap with metal necklace
The piece that is fixed on the tap without thread and allows the hose to be connected by the fast jack. It is attached with an adjustable metal necklace.
1 x Teflon band
Used to seal the threaded joint (eg tap or connectors), preventing water leaks.
