Complete irrigation kit for drip and spray with a 41m hose, timer, nozzles, connectors, fixing stakes 147 pieces

1 x irrigation hose 1/4 ”(tube on flexible) - length 41m /interior 4mm /outer 6mm

• The main pipe through which the water is distributed to each watering point. It is flexible, easy to handle and can be cut to the desired size.

1 x electronic timer for irrigation

• Programmable device that automatically controls the start and stop of the irrigation system. It works on the batteries and allows the exact duration, frequency and time to set the time of watering. Are mounted between the tap and the rest of the installation

1 x Quick Mother Adapter for hose (for timer output)

• The piece that allows the quick connection to the hose when the timer output. Provides click -free clamping.

1 x Quick Mother Adapter for hose (for timer output)

• The piece that adapts the timer timer thread

20 x Adjustable drip nozzle

• The piece with sharp tip and a rotary lid, which allows the adjustment of the flow from slow to the thin circular jet, for precise watering.

15 x fog -type spray nozzle

• Watering head that produces a fine fog, ideal for flowers or sensitive plants. It is easily mounted and ensures wide coverage.

20 x Type T connection with Gimpi

• The piece used to branch the main hose line in two side directions. It is set directly into the hose, without clamps.

2 x Caps Line Closure

• Pieces that are mounted at the end of the hose to stop the flow of water and seal the line.

15 x right 1/4 ”connector with barbed heads

• The piece for connecting two 1/4 hose segments, provided with stop mounting stop.

15 x reduced T -type connector (1/4 "reduction in the nozzle)

• The t -shaped piece used to branch the 1/4 "hose in two directions, having one of the ends with a different diameter or interior thread to install a nozzle. It is used to integrate a nozzle in line, directly on the main route of the hose.

15 x Law Law 1/4 "

• Linear connection with a barbed end for combining thin hose segments

35 x Type C type fastening

• C supports that fix the hose in position above the ground, keeping the nozzles oriented correctly.

1 x tap connector with 2 outputs

• It is mounted on the garden tap and allows to connect two lines of irrigation simultaneously, each with its own closing tap.

2 x fast hose connector (green)

• The piece that connects the 1/4 ”hose to the system, allowing quick coupling without tools or threading.

1 x Adapter for tap (green/black)

• The piece that is mounted directly on the garden tap and allows quick connection to the hose through the system

1 x Adapter for smooth tap with metal necklace

• The piece that is fixed on the tap without thread and allows the hose to be connected by the fast jack. It is attached with an adjustable metal necklace.

1 x Teflon band

• Used to seal the threaded joint (eg tap or connectors), preventing water leaks.